RHL Catalogue

Click here to download the latest catalogue in Adobe PDF format (Adobe Acrobat reader is required to view this catalogue).

General notes on fan installations:

• Fan position should be as practical from the main source of air replacement. This is to avoid short circuiting of the airflow
• Locate the fan at high level close to source of smells or steam
• If the room or dwelling contains fuel burning devices such as a gas boiler with non-balanced flue, it is essential that there is enough replacement air to prevent fumes from being drawn to the flue when the fan is extracting
• ducting a hole trough wall requires approximately a 5-degree slope downwards to the external grille. The slope is to enable any condensation to trickle out

Sitting of Autostat:

• Ideally on an internal wall
• Adjacent to moisture source or between moisture source and external doorway 
• In a large room, site close to moisture source
• Top edge to be 50 - 100 mm down from the ceiling
• Clear corners > 150mm
• Clear any protrusion cupboards etc
• Not within 1000mm of a radiator, a grille or hob
• Not within 1000mm of a grille or hob

Wiring diagrams:

• AS2 Kitchen fan Kit with Autostat IV
• SF12 Bathroom Fan Kit with Autostat IV
• Genesis Bathroom Fan Kit with Autostat IV
• Odyssey TR85/TR85-T/TR85-T100 with light switch in one room
• Odyssey TR85/TR85-T/TR85-T100 with light switch in both rooms
• Odyssey Dryvent B
• Odyssey Dryvent X
• Odyssey Dryvent K BAL
• Odyssey 85/100
• Odyssey 85/100 with Autostat IV
• Odyssey 250/500
• Odyssey 250/500 with Autostat IV
• Odyssey 2x125 BAL
• Odyssey 2x125 BAL with Autostat IV
• Eco 100/150
• Slimline 100/125/150
• Inline TD
• Inline HP single speed
• Inline HP two speed